Product introduction: Pneumatic micro-injection molding machine is applicable to the production of small parts such as plastics, rubbers, resins and other non-metallic materials, sample production before volume production, production of hand plates, sample production in laboratory, production of standard test splines such as tensile and impact, and small batch production.

 The main parameter:

Temperature range:Normal temperature to 400°C

Clamping force: 9 ton

Shot volume:1g~30g

Injection pressure:Up to 200Mpa

Mode-locking mode:Manual mode locking

Demoulding type:Can be automatically ejected or manually

Injection type:Piston type

Piston diameter:10~20mm

Piston stroke:100mm (can be customized)

Ejecting stroke: 80mm

Injection power: cylinder

Cylinder stroke:100mm (can be customized)

Max. mold size: 200mmL*80mmW*40~50mmThickness

Air pressure:Not less than 0.6Mpa (Ordinary compressor is ok)

Material to be processed: ABS, PC, PP, PE, SILICONE, RUBBER, ETC.

Heating power:  400W

Weight: 80kg

Dimension: 430*260*645mm

Voltage: 220V 50~60HZ or 110V 50~60HZ(IF YOU NEED 110V VOLTAGE, PLEASE INFORM US IN ADVANCE)