Products >> Plastics testing machine >>

Digital Melt flow index rate tester plastometer with mini printer

Product No.：2023718231312
Online Inquiry

Melt flow indexer; Plastometer;Melt flow rate test equipment meeting ISO, ASTM Standards

It is used to determine the melt flow rate MFR value of various plastics and resins passing through a certain temperature and load in a viscous state through a standard die every 10 minutes. It is suitable for polycarbonates, polysulfones, fluorine  materials with higher melting temperatures. Engineering plastics such as plastic and nylon are also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM), polycarbonate (PC) resin,PVC etc. The plastic testing is widely used in plastic production, plastic products, petrochemical and other industries, as well as relevant institutions, scientific research units and commodity inspection departments.

Specification

Temperature range	room temperature -450 ℃
Temperature fluctuation	± 0.2 ℃
10mm-70mm temperature uniformity above the die	± 1 ℃
Temperature display resolution	0.1 ℃
Time display resolution	0.1S
Cutting timing range	1-999S adjustable
Die diameter	Φ2.095 ± 0.005mm
Outlet length	8.000 ± 0.025mm
Piston rod diameter	9.474 ± 0.007mm
Piston rod length	6.35 ± 0.13mm
Loading cylinder diameter	Φ9.550 ± 0.007mm
Test range	0.1-300g / 10min
Weight accuracy	± 0.5%
Cutting method	automatic and hand cutting
Output method	micro printer
Operation mode	key control or touch screen
Standards	ISO 1133: 1997( "Determination of the melt mass flow rate MFR and the melt volume flow rate MVR of thermoplastics") ASTM D1238(Test Method for Melt Flow Rate of Thermoplastics by Extrusion Plasticity Meter)
Power supply voltage	AC220V ± 10% 50HZ if you need 110v or 100v, you need to tell us firstly.
Test load	8 levels in total, 8 sets of weights