1. The use of xenon arc lamps that can simulate full sunlight spectrum to reproduce destructive light waves in different environments can provide corresponding environmental simulation and accelerated testing for scientific research, product development, and quality control.

2、

The SN-type xenon arc lamp test chamber can be used for selecting new materials, changing existing materials, or evaluating durability changes after material composition changes. It can simulate the changes that occur when materials are exposed to sunlight under different environmental conditions.

2. Evaluate the light and weather resistance of certain materials under the action of high-temperature light sources by conducting aging tests on material samples exposed to xenon arc lamp illumination and thermal radiation. Mainly used in automobiles, coatings, rubber, plastics, pigments, adhesives, fabrics, etc

Parameters Xenon Arc Lamp Accelerated Climate Testing Chamber:

1. Studio size (mm): (500 × five hundred × 600) wide × deep × High)

Outer box size (mm): (850 × one thousand and two hundred × 1850) (width × deep × High)

2. Temperature range: 10 ℃~80 ℃

3. Humidity range: 65%~98% R.H

4. Blackboard temperature: 63 ℃, 100 ℃ (deviation ± 3 ℃)

5. Temperature fluctuation: ≤ ± 0.5 ℃

6. Temperature uniformity: ≤ ± 2.0 ℃

7. Humidity fluctuation:+2%~-3% R.H

8. Glass window filter: borosilicate glass

9. Xenon lamp light source: imported air-cooled xenon arc light source

10. Xenon lamp power: 1.8KW

11. Total quantity of lamp tubes: 1 piece

12. Rainfall time: 1-9999 minutes, continuous rainfall adjustable

13. Rainfall cycle: 1-240 minutes, with adjustable intervals (interruptions) for rainfall

14. Spray nozzle aperture: Ф 0.8mm (return water with ultra fine filter to prevent nozzle blockage)

15. Rainwater pressure: 0.12-0.15kpa

16. Water spraying cycle (water spraying time/no water spraying time): 18min/102min or 12min/48min (water spraying time/no water spraying time) Water spraying pressure 0.12-0.15Mpa

17. Heating power: 2.5KW

18. Humidification power: 2KW

19. The lighting cycle can be continuously adjusted for 0-999 hours

20. Spectral wavelength: 295nm~800nm Irradiance range: 100W~800W/㎡, adjustable.21. Adjustable rotation speed of the loading platform (stepless speed regulation)

Standards：

1.7 ASTM D3499-2011 "Test Method for Toughness of Plywood"

1.8 ASTM G151-2010 "Practice for Exposure of Nonmetallic Materials in Accelerated Testing Devices Using Laboratory Light Sources"

1.9 ASTM G155-2005a "Operating Procedures for Xenon Arc Lamp Equipment for Exposure of Nonmetallic Materials"

1.10 AATCC TM169 "Weathering Resistance of Textiles - Xenon Lamp Exposure Test"

1.11 ISO 4892-2-2009 "Methods of exposure to plastic laboratory light sources - Part 2: Xenon arc lamps" and other international standards