Dongguan Shengtai Instrument Co., Ltd.
Dongguan Shengtai Instrument Co., Ltd.

Products >> Environment machine >> 

  • High Speed Heating and Cooling Thermal Shock Test Chamber
High Speed Heating and Cooling Thermal Shock Test Chamber

High Speed Heating and Cooling Thermal Shock Test Chamber

 Main parameters OF High Speed Heating and Cooling  Thermal Shock Test Chamber:

Test method

Pneumatic operated door switch 3 chambers

Inner dimension (W*D*H)

500*450*450mm

External dimension (W*D*H)

1380*1370*1980mm

Heating speed

+60~+100℃ about 10 minutes

Low temperature chamber pre-cooling range

-65 ~ 0

Cooling speed

Ambient ~-65℃ about 65 minutes

Temperature deviation

±3℃

Thermal recovery time

Within 5 minutes

External material

Antirust processing cold-rolled steel sheet

Internal material

SUS#304 stainless steel

Thermal insulation material

Polyurethane foam and fiberglass

Coolant

R404A / R23

Cooling method

Air cooling

Pressure

0.2 - 0.5Mpa

Power supply

Three phase, 380V, 50Hz

 

Features of  Thermal Shock Test Chamber:

1. Perfect appearance and easy to operate.

2. Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.

3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.

4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…

5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.

6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.

7. With RS-232C communication port for connecting PC to control, record and save test report.

 

High temperature chamber of  Thermal Shock Test Chamber:

Heater: NI-CR alloy electric heater

Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.

 

Low temperature chamber:

Cooler: Fin cooler, regenerator

Draught fan: centrifugal fan

 

Drive device:

Pneumatic cylinder: Drive the air door of high, environmental, low temperature

Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)


Contact Us

    Name: Anne Liang

    Tel: +86-13592713824

    E-mail: annelyno@163.com

    WeChat: Annefa1156

    Add: One building, 8 zhuzhong road, Houjie Town, Dongguan City

    annelyno@163.com
WechatClose
Wechat